G4-504HD2a User Guide
7 Special Topics
7.1
Setting Up IP Cameras
In contrast to setting up Analog/Analog HD cameras, which just involves wiring up the camera to the
appropriate channel input on the device, there is an extra step required for the digital IP Camera.
In the G4-504HD2a though, adding a new IP camera to the system can easily be done through the
automated setup options available in the setup menu.
7.1.1 Manually Adding an IP Camera
The steps below provide a quick guide to adding a new digital IP Camera to the system manually.
For a detailed discussion on the configuration options available, please refer to Section 6.4.3.
Step
Navigate to: Main Menu
7.1.1.1
Enable the channel that you wish to set up the new IP Camera on, by selecting the
▪
checkbox next to the channel number.
Click on the ( ) icon which is on the same row as the channel number you wish
▪
to add the new IP Camera on.
Special Topics
Setup
Surveillance
→
→
IPC Setup
→
127 of 151