Table of Contents
Advertisement
G4-504HD2a User Guide
Please review and adjust the following default settings to match your actual camera configuration. For
a detailed explanation of each setting, please see Section 6.4.2.
General
Main Stream
Basic System Quick Start
System
Overwrite
Lock Duration
Pre-Recording
Channel Name
Enable
Resolution
DEFAULT SETTINGS:
NTSC
▪
DEFAULT SETTINGS:
By Capacity
▪
DEFAULT SETTINGS:
7 days
▪
DEFAULT SETTINGS:
Checkbox – Unselected
▪
DEFAULT SETTINGS:
Channel 1 – set name as – CH1
▪
Channel 2 – set name as – CH2
▪
Channel 3 – set name as – CH3
▪
Channel 4 – set name as – CH4
▪
Channel 5 – set name as – CH5
▪
The
device
comes
standard names for the camera channels. You
may change these names if desired to give each
channel an easily remembered and/or location-
specific name.
Maximum of: 5 characters
Notes:
-
Channels 1 to 4 are Analog/Analog HD
channels.
-
Channels 5 is a Digital IP camera channel.
For channels 1 to 5, only enable the channels
which actually have cameras connected. Please
note that the system will show a videoloss
message on channels which are enabled, but
do not have a connected camera (i.e., no
incoming video stream).
DEFAULT SETTINGS:
For channels 1 to 4 (Analog camera channels),
set the following:
pre-configured
with
40 of 151
Advertisement
Table of Contents
