G4-504HD2a User Guide
Driver Info
4.6
Step 6: Setting Basic Preferences
Next you will need to setup the ignition on/off delay time.
Navigate to: Main Menu
Please verify that the following default settings are correctly configured. For a detailed explanation of
each setting, please see Section 6.3.3.
ON/OFF
After that, you need to select the preferred speed measurement unit which will be used by the device.
Navigate to: Main Menu
Please verify that the following default settings are correctly configured. For a detailed explanation of
each setting, please see Section 6.5.1.
Speed
Basic System Quick Start
Driver Number
Driver Name
Setup
Basic Setup
→
→
ON/OFF Mode
DVR Power Off Delay
Setup
Collection
→
→
Unit
If the vehicle will have a specific driver, you may
use this field to key in the identification number
of the driver (if required).
Maximum of: 10 characters
If desired, you may also key in the name of the
vehicle driver here.
Maximum of: 10 characters
Startup
→
DEFAULT SETTINGS:
Ignition
▪
DEFAULT SETTINGS:
300
▪
This means that when the vehicle is turned off,
the device will continue to record for another
300 seconds (5 minutes) before shutting down.
Please change this setting to reflect the
preferred duration of time you wish to continue
recording after the vehicle is turned off.
General
→
DEFAULT SETTINGS:
MPH
▪
38 of 151