G4-504HD2a User Guide
Main Stream
Configuring the G4-504HD2a
Channel
Channel Name
Enable
Drop Down list which displays the list of
available camera channels. Selecting one of
them will display the currently set configuration
values, and allow you to modify them.
These configuration values are channel specific.
You will need to select each channel in turn and
configure them separately.
Notes:
-
For quick configuration, the copy function
allows you to easily copy the settings of the
current channel to another channel.
Alphanumeric text field for setting the channel
name. This is useful for giving the channel an
easily remembered and/or location-specific
name.
You may input up to a maximum of:
5 characters
▪
Notes:
-
Channels 1 to 4 are Analog/Analog HD
channels.
-
Channel 5 is a Digital IP camera channel.
DEFAULT SETTINGS:
Channel 1 – set name as – CH1
▪
Channel 2 – set name as – CH2
▪
Channel 3 – set name as – CH3
▪
Channel 4 – set name as – CH4
▪
Channel 5 – set name as – CH5
▪
Checkbox – if selected, enables this channel for
inclusion into the main stream recording.
DEFAULT SETTINGS:
For channels 1 to 4, only enable the channels
which actually have cameras connected. Please
note that the system will show a videoloss
message on channels which are enabled, but
do not have a connected camera (i.e., no
incoming video stream).
87 of 151