G4-504HD2a User Guide
Figure 7-2 Enabling Camera Channels
Use the Channel drop list to go to the channel that you have bound the IP Camera to, and ensure that
the Enable checkbox is selected.
The IP Camera will now be displayed and recorded on that channel.
7.3
Configuring Substream Recording Quality
When you choose to record the substream to a secondary storage device using the Sub Record option,
you can also choose a different set of quality settings to use for this substream recording.
To configure this, first go to the Record settings under the Surveillance tab in the Setup menu as follows:
[Navigate to: Main Menu
Setup
Surveillance
Record
Dual Stream]
→
→
→
→
Figure 7-3 Setting Up for Substream Recording
Special Topics
130 of 151