Table of Contents
Advertisement
G4-504HD2a User Guide
Location
Mileage
Configuring the G4-504HD2a
Source
Location Data Source
Total
Base Mileage
Operation
system is adopted will typically choose
KM/H.
DEFAULT SETTINGS:
MPH
▪
Drop list allowing the user to set the source for
the speed measurement:
Satellite
▪
Pulse
▪
Notes:
-
If the measurement unit is set to Pulse, you
will also need to select the calibration mode
and perform a manual calibration.
-
Pulse mode is currently unsupported, and
Gatekeeper Systems recommends the use of
Satellite for this setting.
DEFAULT SETTINGS:
Satellite
▪
Drop list for setting the navigation mode:
GPS
▪
Notes:
-
Currently, this is the only available setting.
DEFAULT SETTINGS:
GPS
▪
Displays the total mileage which the vehicle has
travelled.
Sets the mileage of the vehicle on first day of
service on that route. This value can be entered
manually.
Correct: Allows the current mileage of the
vehicle to be entered.
Clear: Resets the mileage of the vehicle to 0.
103 of 151
Advertisement
Table of Contents
