Figure 2-3 Rear View Of The G4-504Hd2A - Gatekeeper G4-504HD2a User's Operating Manual

G4-504HD2a User Guide
1. Wi-Fi Antenna In: This is the connection point for the Wi-Fi antenna. Currently not used, and
this port should be covered with a rubberized cap. (Please speak with your sales
representative for Gatekeeper Wireless Options).
2. GPS Antenna In: This is the connection point for the external GPS. If there isn't a GPS antenna
attached, this port should be covered with a rubberized cap.
3. Camera In (part no. CAB000310): Allows for the connection of up to 4 Analog and/or Analog
HD cameras.
4. Serial In (part no. CAB000382): This is the input port for the attached serial connector.
5. Sensor In (part no. CAB000383): This is the input port for the attached sensor connector.
6. USB Port: This is the port to use to connect Gatekeeper Systems FireBox.
7. WAN RJ45 Ethernet Cable In: Used to connect the device to an external network (internet).
8. ICD: Allows for video out using an ICD2 for configuration setup.
9. Power (part no. CAB000360): Main power cable for the G4-504HD2a.
10. Digital IP Camera In (part no. CAB000377): Allows for the connection of two Gatekeeper
Systems Digital IP cameras.
11. LAN Cable in: Used to connect the device to your computer or internal network.
12. 3G/4G: Cellular connections. Currently not used, and both ports should be covered with a
rubberized cap. (Please speak with your sales representative for Gatekeeper Systems cellular
options).
Your G4-504HD2a at a Glance

Figure 2-3 Rear View of the G4-504HD2a

12 of 151