G4-504HD2a User Guide
6.6
Alarm Settings
All settings related to alarm events are contained in this section. The user can configure the settings for
the various alarms such as speed, panel, IO, G-Sensor, as well as video loss events.
Figure 6-8 Alarm Tab in the Device Configuration Options
6.6.1 Base
This subsection enables you to set up the trigger for alarm events based on speed, panel and IO input,
and also to define the actions that will be taken when the alarm occurs.
Speed Alarm
Configuring the G4-504HD2a
Navigate to: Main Menu
Overspeed / Enable
Alarm Type
Navigate to: Main Menu
→
Checkbox – if selected, enables the device to
monitor for overspeed events. In case of speed
exceeding the specified threshold, this alarm
will be triggered.
DEFAULT SETTINGS:
Checkbox – Unselected
▪
Drop list to select the classification level for the
alarm:
Important
▪
General
▪
Setup
Alarm
→
→
Setup
Alarm
Base
→
→
108 of 151