Table of Contents
Advertisement
G4-504HD2a User Guide
Video
Configuring the G4-504HD2a
Videoloss
Alarm Type
Trigger
Checkbox – if selected, enables the device to
monitor for videoloss events. In case of
videoloss detected on the specified camera
channels, this alarm will be triggered.
DEFAULT SETTINGS:
Checkbox – Selected
▪
Drop list to select the classification level for the
alarm:
Event
▪
Alarm
▪
DEFAULT SETTINGS:
Alarm
▪
Click the ( Setup ) button under Trigger to
display the Trigger setup screen for the
videoloss detection.
This will display a screen with a list of
checkboxes
allowing
combination of camera channels for which the
device will monitor for video loss events.
Also on this setup screen, you may click the (
Set Period ) button to display the schedule
management screen where you will be able to
define a number of time periods during which
the device will be monitoring for the videoloss
events as follows:
Add a Plan – use the drop list to select
▪
a day of the week (from Sunday to
Saturday). Clicking the ( Add a Plan )
button will then add a time period to
the schedule.
Start Time – this is a time field which
▪
allows you to set the starting time to
begin the monitoring.
End Time – this is a time field which
▪
allows you to set the ending time to
stop the monitoring.
x – you can always click the (x) button
▪
to remove the associated time period
from the schedule.
Copy To – this feature allows you to
▪
copy the current time period settings
scheduled for any particular day to
you
to
select
a
116 of 151
Advertisement
Table of Contents
