Cursor Placed On Routepoint Or Linepoint - Simrad CX34 Manual

Chart menu and INFO windows

4.4.5 Cursor placed on routepoint or linepoint

With chart in active window, and cursor placed on a routepoint or
ENT
linepoint, press [ENT] to call up the quick menu with the following
to choose from:
Routepoint found
Name: RTE 1
From start:
To end:
1
2
3
4
5
8
0
PAGE
MENU
1
Edit user data opens a new info window:
Routepoint
1
2
CLR
3
4
5
MENU
More user data will toggle between data on routepoint and route leg
PAGE
108.8nm
34.26nm
Edit user data
Chart info
Find nearest port services
Bearing and dist from A to B Refer to section 4.4.2
Lock cursors
Tidal current prediction
Cursor to center
More user data
Exit
Open new info window to edit routepoint
Edit point
Move point with cursor
Move point
Delete point Delete routepoint
Add point to route - in beginning or at end.
Add point
Open new info window to edit route
Edit
Delete the whole route
Delete
Exit info window
Exit
CX34/44/54 Operator manual
5
Refer to Appendix C
Refer to Appendix C
Refer to section 4.4.2
Refer to Appendix C
Refer to section 4.4.2
Exit info window
Chapter 4-11