Dedicated Function Keys - Simrad CX34 Manual

Chapter 1-4
Heading is only available if a compass was detected at start-up.
Your present position will automatically be updated within a few min-
utes. When ready, the ship symbol on the chart will flash, the position
coordinates will stop flashing, and the *** will be replaced by actual
course and speed figures.

1.3.1 Dedicated function keys

Short press will toggle overlay on/off:
RADAR
Radar display
Long press will toggle between:
RADAR
Radar display
Short press will toggle between:
CHART
Chart + data field at the right side or top, or optional echo data.
Long press will toggle between:
CHART
Chart display
RadarChart overlay
Dual Radar
Dual Chart
CX34/44/54 Operator manual
Introduction and safety summary
The toggle function will require:
1. Valid position.
2. Valid heading from compass
3. Orientation set to NU
- refer to section 3.2.7.
Radar & Chart
Custom screen1
Custom screen
Custom screen2