Loran C - Simrad CX34 Manual

Chapter 7-6

7.4 Loran C

MENU
Call up the menu bar, and...
load Loran C chain display
5,4
Open for change
ADJ
Leaf through the available chains - see listing below.
+/-
If required, go to the slaves, and...
Toggle between available slaves (not all chains have more than one
+/-
slave)
...and it is possible to alter the figures in the time delay
0-9
If required, go to Offset, and key in a positive or negative offset
Key in a positive or negative offset to the time delay (toggle positive/
0-9
negative with +/-)
Confirm entry
ENT
To change the position readouts to Loran C mode, see section 9.4
under Pilot/Position setup, where 'Display position as' can be tog-
gled to 'Loran C'.
List of Loran C chains:
Central Pacific
Gulf of Alaska
Southeast U.S.
Great Lakes
Northeast U.S.
Canadian West Coast
Canadian East Coast
Labrador Sea
West Coast U.S.
North Pacific
4990 Commando Lion
7960 North West Pacific
7980 Norwegian Sea
8970 Mediterranean Sea
9960 Icelandic
5990 Saudi Arabia South
5930 Saudi Arabia North
7930 Eastern U.S.S.R.
9940 Western U.S.S.R.
9990
CX34/44/54 Operator manual
Miscellaneous menu
5970
9970
7970
7990
9980
7170
8990
7950
8000