Demo Mode - Simrad CX34 Manual

Chapter 3-28
Composition - materials such as metal and water are good reflec-
tors. Others, such as wood and fiberglass are poor reflectors.

3.3 Demo mode

For the purpose of a demonstration, the radar function has a demo
mode, which can present a simulated radar picture without having a
radar scanner connected.
Warning! Any adjustments/setups already made to the radar func-
tion will return to default settings when selecting the Demo mode.
To activate the demo mode:
MENU
Call up the menu bar, and...
Open the SETUP menu
7
Load the Radar setup
RADAR
- a warning will pop up that you are about to change settings for the
radar, press [MENU] to abandon, or [ENT] to continue.
Use the cursor to go to 'Scanner type', and select 'Demo' with the
+/- keys
Accept change & exit Radar setup
ENT
Call up Radar quick menu
ENT
Turn 'Power on'
RADAR
- the legend 'Detecting' will appear on the screen for a short while,
then a countdown of 20 seconds will start before the system enters
Standby mode. It now says 'Standby' on the screen.
Call up Radar quick menu
ENT
Start transmission
GOTO
Use the +/- keys to adjust the range and presentation
+/-
The legend Demo will stay in the top left of the screen to indicate
the demo mode is active.
CX34/44/54 Operator manual
Radar menu