Data Transfer Via Pc Interface - Simrad CX34 Manual

Waypoint / route menu

8.11 Data transfer via PC interface

Data transfer to and from a route planning program on a Personal
Computer can be made via NMEA connection (Refer to Optional
connections in the Installation manual) by means of the standard
NMEA0183 sentences WPL and RTE.
The data transfer on these two sentences does not include WP sym-
bol, color, XTE limit, etc.
PC-based planning systems differ in operation and performance
beyond the control of Simrad.
MENU
Call up the menu bar, and...
load the Data transfer window
6,8
1
DataCard upper drawer
3
DataCard lower drawer
5
PC-Planner
7
NMEA connection
MENU
Select the NMEA connection
7
CX44/54 example:
Normal NMEA communication on
selected channel will be
1
NMEA 1
3
NMEA 2
MENU
Press [1] or [3] to select the NMEA port where the PC data cable is
connected. This will activate a new window, see next page.
Data transfer
Exit
WARNING!
interrupted.
Exit
CX34/44/54 Operator manual
Chapter 8-21
- see section 8.9
- see section 8.9
- see section 8.10
The normal communica-
tion via this NMEA port
is temporarily inter-
rupted during the time
of data transfer.