Data Transfer Via Datacard To/From Pc-Planner - Simrad CX34 Manual

Chapter 8-20

8.10 Data transfer via DataCard to/from PC-Planner

Data transfer to and from a PC-Planner can be performed via Simrad
DataCard. Transfer routes, waypoints and tracks stored in the inter-
nal memory of the CX34/44/54 to the PC-Planner or routes and
waypoints from the PC-Planner to the CX34/44/54 unit.
MENU
Call up the menu bar, and...
load the Data transfer window
6,8
1
DataCard upper drawer
3
DataCard lower drawer
5
PC-Planner
7
NMEA connection
MENU
Select the PC-Planner function - to transfer data, a DataCard must
5
be placed in the drawer below the keypad. Example:
Drawer
1
Import
2
Export
Status: DataCard empty
MENU
Choose [1] to transfer data (routes and waypoints) from PC-Planner,
or choose:
2
Export - to transfer data (routes, waypoints and tracks) to DataCard.
Press [ENT] to accept 'DataCard will be erased ?'
ENT
Status will indicate: 'Saving data', and close with 'Transfer com-
pleted'. The data on the DataCard is now ready to be loaded into the
PC-Planner.
Data transfer
Exit
PC-Planner
Exit
CX34/44/54 Operator manual
Waypoint / route menu
- see section 8.9
- see section 8.9
- see section 8.11
Use the +/- key to toggle
between the UPPER and
UPPER
LOWER drawer.