Pilot / Position Setup - Simrad CX34 Manual

Setup menu
speed with the risc of losing bottom detection, RANGE or a max.
depth setting (50 to 2000m) is recommended. The unit will not wait
for a bottom echo, but transmit a new pulse as soon as the selected
range has been reached. Auto range is automatically switched off.
The depth alarm setting will have a higher priority than the selected
depth range.
Demo mode - the echosounder will function as though a transducer
was connected, but all data presented in the display will be simulated.

9.4 Pilot / Position setup

MENU
Call up the menu bar, and...
open the SETUP menu, and...
7
load Pilot/Position setup display
PILOT
Pilot/Pos setup:
Display position as:
Start position:
Speed and course filter level:
Display speed as:
Course and bearing as:
COG vector length:
Grounding alarm, depth:
Grounding alarm, objects:
Time:
Time:
MENU
Go to the function you wish to change
0-9
Key in new values, or...
Toggle between available values
+/-
Confirm editing
ENT
Display position as - the position can be shown in latitude/
longitude, Loran C or decca coordinates (after selecting chain from
56°57.000N 010°25.000E
13:43:56
Exit
CX34/44/54 Operator manual
LAT/LON
MAGNETIC
06 min
03m OFF
Date: 15-01-2005
ENT
Accept
Chapter 9-9
3
SOG
ON
UTC