Start / Stop Track - Simrad CX34 Manual

Waypoint / route menu

8.5 Start / stop track

The track function will provide a track trailing the movement of your
ship. As default from the factory, the first track is stored as TRACK
1, the next as TRACK 2 etc.
To start track function:
PLOT
Call up the PLOT menu
Load Start track pop-up window
7
If you wish to change the default values:
Move cursor to where you wish to make a change
+/-
Toggle between available values, or...
key in new values
0-9
Start track
ENT
Name of track can be altered (max. 25 characters).
Display track can be set ON and OFF, where OFF will make it
invisible on the screen. Turn ON to put it back on the screen.
Update of the track can be performed by distance in nautical miles,
or by time interval.
CX34/44/54 Operator manual
Chapter 8-11