Radar & Chart Display - Simrad CX34 Manual

Radar menu
Carry out adjustments by using the same procedures as described in
section 3.2.5 for the standard radar display, except for the guard zone
which is not available in the secondary radar display.
Indication of HDG (heading), Rpm (scanner rotation speed) and
Pulse is only available in full screen presentation.
3.2.9 Radar & Chart display
MENU
Call up the menu bar, and...
load the Radar & Chart display
1,3
The RadarChart overlay is not available in this display!
Toggle between active windows on screen
WIN
• Synchronize cursors or scale and range (will require a valid posi-
tion, and heading input from connected sensor)
In synchronized mode the orientation mode of the chart is set to the
same as the radar orientation. When position data is available the
chart scale is adjusted to approximately the same range as the radar.
When heading data is available and a cursor is active, the chart
cursor will be set to the radar cursor position.
The lock function is controlled by the radar display, which means
that e.g. moving the cursor in the radar display will move the cursor
in the chart display as well. However, when moving the cursor in the
CX34/44/54 Operator manual
Chapter 3-25