Turn Power On; Turn Power Off - Simrad CX34 Manual

Fundamentals & initial start-up
course and speed figures - see section 6.3 Position display.
Do not start radar transmission before the antenna is warmed up, refer
to section 3.2.3 Start transmission.
Select display language:
Call up the menu bar, and...
MENU
press [7], [1] to call up the language display
7,1
Press up on the cursor to go to the bottom line in the display
Select language
+/-
Confirm entry
ENT

2.8 Turn power on

Starting up for the first time, or after loading a new software, or
after a master reset - see section 2.7. Starting up at any other time:
To turn on the CX34/44/54, press and hold the [PWR] key until you
PWR
have a picture on the screen
Press [ENT] when the system is ready
ENT

2.9 Turn power off

Call up INFO window, and...
PWR
Press and hold until the curtains begin to close
PWR
The CX34/44/54 is now turned off. All the data and setups are saved
and stored in the internal memory and, of course, will be available
next time the unit is turned on.
CX34/44/54 Operator manual
Chapter 2-9