Cursor Placed On Trackpoint - Simrad CX34 Manual

Chapter 4-12

4.4.6 Cursor placed on trackpoint

Trackpoints are not as easily recognized as Routepoints, you may
have to move the cursor along on the track to locate a trackpoint.
With chart in active window, and cursor placed on a trackpoint, press
ENT
[ENT] to call up the quick menu with the following to choose from:
Trackpoint found
Name: TRACK 1
Total:
1
2
3
4
5
8
0
PAGE
MENU
1
Edit user data opens a new info window:
CLR
1
2
3
MENU
Press [1] to delete points from A to B - move cursor to point B, and
press [ENT] to delete all trackpoints between cursor position on
chart and point B.
More user data if cursor is placed on a MOB track you can toggle
PAGE
between data on MOB symbol and data on MOB track. The symbol
and track are edited separately.
836 points
Edit user data
Chart info
Find nearest port services
Bearing and dist from A to B Refer to section 4.4.2
Lock cursors
Tidal current prediction
Cursor to center
More user data
Exit
Trackpoint
Delete point
Delete points from A to B See below
Edit
Delete
Exit
CX34/44/54 Operator manual
Chart menu and INFO windows
3
Refer to Appendix C
Refer to Appendix C
Refer to section 4.4.2
Refer to Appendix C
Refer to section 4.4.2
Exit info window
Delete trackpoint
Open new info window
Delete the whole track
Exit info window