Shortcut To The Pages In The Radar-Series; Initial Radar Display Setup - Simrad CX34 Manual

Radar menu

3.2.1 Shortcut to the pages in the radar-series

The RADAR function is one of the main functions in the CX34/
44/54. Each page under the [RADAR] key will include a window
representing the radar function. It is not possible to exchange main
function displays with a new display. Refer to section 2.1, 2.1.1 and
2.1.2 for further information on the display and page system.
From any display:
Long press on the [RADAR] key will toggle between:
RADAR
Radar full screen
All the displays are fixed, except for the two quarter windows in the custom
screen, which can be exchanged with a different display selected via the menu.
From radar display:
Short press on the [RADAR] key will toggle overlay on/off
RADAR
- see section 3.2.6.
Radar display

3.2.2 Initial radar display setup

After the installation is completed, check the Radar setup (section
9.1) if the Scanner height is correct and the Heading adjust is
zero degrees to ship's center line. If not, carry out adjustments as
described in the Radar setup. The Scanner type is preset to Auto
detect and as such, the system will automatically initiate the correct
parameters for the connected scanner.
Dual Radar
RadarChart overlay
CX34/44/54 Operator manual
Radar & Chart
Chapter 3-9
Custom screen