C-Map Cartridges - Simrad CX34 Manual

Chapter 9-6

C-MAP cartridges

UPPER
Name: EAST DENMARK AND WEST SWEDEN
Code: EN-C161.4
Date: 14/09/2002
LOWER
Name:
Code:
Date:
MENU
ENT
Press [ENT] to test the data on the C-MAP C-card
If a C-card is defect, it must be removed before you can exit the display.
MENU
Exit the window
In addition to the larger boundaries of the world chart there will be
separate boundary lines for the individual charts stored on the same
cartridge. However, the boundary lines for the C-MAP chart areas
can be turned off, so they will not be visible on the chart - refer to
section 4.5 Chart setup.
Other chart areas can quickly be reached by means of the zoom keys:
+
Zoom out until desired area becomes visible
Move cursor to approximate area, and...
-
Zoom in
The chart will automatically start to move when cursor reaches the
edge of the screen. When cursor is switched off [CLR], the chart will
return to ship's position.
9.3 Echosounder setup
With built-in echosounder function: The Echosounder setup dis-
play mainly consist of general settings, but also applies to a specific
frequency where stated. The CX34/44/54 features single and dual
transceiver transmitting at 38 (CX44/54), 50 and 200 kHz.
MENU
Call up the menu bar, and...
Exit
CX34/44/54 Operator manual
Setup menu
Test
ENT