Radar Quick Menu - Simrad CX34 Manual

Radar menu

3.2.6 Radar quick menu

From active radar display:
Call up the Radar quick menu
ENT
RADAR
GOTO
1
2
3
4
5
6
CHART
PLOT
ADJ
MENU
If working with both EBL-VRM cursors, you can toggle between
which one should be active via the quick menu.
Power On/Off - Turning power on will activate scanner warm up
RADAR
and enter standby mode, see section 3.2.3.
Transmit/Standby - Transmit will start transmission and antenna
GOTO
rotation, see section 3.2.3.
1 Activate EBL-VRM1
A dotted line + circle will be drawn on the screen. Use the cursor key
to move the EBL-VRM1 cursor. By placing the square cursor point
over a target or over an object, it will indicate the distance to same.
To turn off:
Radar quick menu
Power On
Transmit
Activate EBL-VRM1
Activate EBL-VRM2
Activate Cursor
Show Navigation Point
Heading line
Clear trails
Show Overlay Chart
Show Overlay User Data
Overlay Chart Setup
Exit
Press [ENT], [1] again to hide EBL-VRM1.
Long press on [CLR] will turn off all active cursors.
Toggle on/off directly from the [EBL] key.
CX34/44/54 Operator manual
Chapter 3-17