Start And Stop Trip Recordings; Long-Term Statistics - Simrad GO XSE Operator's Manual

currently underway and your speed has been more than 2 knots for
20 seconds. You will be prompted to continue a trip or start a new
trip if the trip was not explicitly saved before a power off.
You can manually start the recording later from the TripIntel page.
You can turn off the automatic trip detection feature from the
Tracks and Trip settings dialog.

Start and stop trip recordings

If you have selected to not start recording a trip from the automatic
trip detection prompt, you can manually start a recording from the
TripIntel page.
The Start and Stop trip options let you specify a trip recording. You
can use them to segment a single passage into multiple trips
providing a finer level of control of the information that is logged for
a journey.

Long-term statistics

Select Long Term Statistics to view seasonal trip information such as
engine running hours, total distance traveled, and fuel economy.
66
TripIntel | GO XSE Operator Manual