Clean Electrolytic Cell - Hayward AquaRite 100 Technical Training Manual

Salt chlorine generator
Hide thumbs Also See for AquaRite 100:
Table of Contents

Advertisement

How To: Clean the Cell
Cell cleaning frequency is dependent on several factors; pH & calcium levels have the
greatest effect on how often cells requires cleaning. In pH environments between (7.2
- 7.8) cells typically require cleaning 3-4 times a year (with moderate calcium levels).
Turn Pump Off & Remove Cell
Wear Protective Equipment
Step 1
Step 2
Remove
Calcium and
other debris
from the Cell
Inspect cell for calcium deposits. Even if a cell appears
If the cell requires cleaning, always wear all
clean, it may still require cleaning if salt accuracy isoff
recommended protective equipment such as gloves,
and/or chlorine production has diminished.
apron, and safety goggles.
NOTE: Mix solution and clean cell only in a well ventilated area.
Muriatic and other acids can cause severe injury, burns and respiratory problems if not handled
properly. Refer to the manufacturer's directions for safehandling.
12

Advertisement

Table of Contents
loading

Table of Contents