Table of Contents
Advertisement
Problem Detected: LED #2
When these lights illuminate together, the Cell reports salt levels above 4500.
Test the Salt Level
Verify Water Temperature is Within Range
Step 3E
Step 3F
Desired
Water
Desired Salt
Temperature
Concentration:
is between
1500-4500 PPM
-
104°F
65°F
Test the salt concentration of the water using an
If water temperature is NOT within the proper range,
independent test, with a calibrated salt meter. If salt
wait until the water temperature is between 65°F -
level is above 4500, dilute salt level
(referring to salt
104°F . If the temperature IS within the proper range
dilution calculation on pg.
55). If fine, go to Step 3E.
continue to step 3G.
40
Advertisement
Table of Contents
