Table of Contents
Advertisement
How To: Test/Replace Cell Cord (Cont.)
Remove Front Cover
Disconnect Cell Cable
Remove cell
cable from cell
vessel
Slowly separate the front cover from the back of the
Remove cell cable from the cell vessel by turning the lock
AQR100 and move it towards the top of the unit. Be
nut counter clockwise and removing cable. Unplug the
mindful not to damage the membrane cable as itwill
cell cable from the PCB. Cell cable plug is shown in the
remain connected to the PCB. Go to next step.
picture to the right. Go to next step.
15
Advertisement
Table of Contents
