Table of Contents
Advertisement
No LED's On Display (Cont.)
No LED's indicate a loss of power to/within the AQR100
Turn Power to AQR 100 Off
Remove Access Screws
Step 1C
Step 1D
Breaker should
be OFF
Turn AQR100 power off at the breaker. Remove the
Use a magnetic Philips head screwdriver to remove the
control box from wall and turn it over to access the back.
10 screws, then rotate control box onto it's back.
Go to step 1D.
Go to step 1E.
24
Advertisement
Table of Contents
