Table of Contents
Advertisement
Problem Detected: Inadequate Flow
These lights illuminated together indicate Low or No water flow through cell vessel
Verify Pump is Turned On and Running
Inspect the Cell
Step 2A
Step 2B
Remove
calcium and
other debris
from the cell
Verify the timer and
breaker are in the"ON"
position
Verify pump is on and water is flowing. If pump is
The cell must be clean to report an accurate salt reading.
running, remove power to the AQR100 for two mins
If cell is dirty, clean the cell
(steps on
pg.11-12). If cell is
then re-apply. If error still does not clear go to step 2B.
clean, like the image above, go to step2C.
The cleanliness of the cell plays a major role in the AquaRite 100's ability to report salt levels
33
accurately.
Advertisement
Table of Contents
