Patterns; Autoscan; Calling Autopan; Auxiliary Button - Dahua NVR21-4KS3 Series User Manual

5.6.7.4.3 Patterns

Procedure
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the pattern.
Step 2 Click
The PTZ camera moves according to the configured pattern repeatedly.
Step 3 Click

5.6.7.4.4 AutoScan

Procedure
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the border.
Step 2 Click
The PTZ camera performs scanning according to the configured borders.
Step 3 Click

5.6.7.4.5 Calling AutoPan

Procedure
Step 1 On the expanded PTZ control panel, click
Step 2 Click

5.6.7.4.6 Auxiliary Button

On the expanded PTZ control panel, click
In the Shortcut Aux list, select the option that corresponds to the applied protocol.
In the Aux No. box, enter the number that corresponds to the AUX switch on the decoder.
to call the pattern.
again to stop calling the pattern.
.
again to stop auto scanning.
again to stop moving.
Figure 5-47 Auxiliary
to start moving in horizontal direction.
.
154
User's Manual