Using Ssa; Accessing Ssa - HPE ProLiant User Manual

Subtopics Subtopics

Using SSA

Using SSA
Using SSA Using SSA
SSA provides high-availability configuration, management, and diagnostic capabilities for all Smart Array products.
Subtopics Subtopics
SSA features SSA features

Accessing SSA

Accessing SSA
Diagnose Diagnose
SSA features SSA features
SSA is a browser-based utility that runs in either offline or online mode. SSA:
Supports online array capacity expansion, logical drive extension, assignment of online spares, and RAID or stripe size migration.
Suggests the optimum configuration for an unconfigured system.
Provides different operating modes, enabling faster configuration or greater control over the configuration options.
Displays on-screen tips for individual steps of a configuration procedure.
In SSA, you can select a controller from the menu at the top left-hand side of the screen, or you can choose to configure or diagnose an
available controller from the same menu.
Accessing SSA Accessing SSA
About this task About this task
SSA can be launched from F10 SSA can be launched from F10
Press F10 and Select SR Storage Administrator from the menu.
The Smart Storage Administrator window is displayed.
Launching SSA from Intelligent Provisioning Home Screen Launching SSA from Intelligent Provisioning Home Screen
1. On the Intelligent Provisioning home screen, click Perform Maintenance
2. Select SR Storage Administrator from the maintenance options.
The Smart Storage Administrator window is displayed.
Subtopics Subtopics
Configuration Configuration
Configuration Configuration
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers 48