HPE ProLiant User Manual page 19

Mount Point Size (MiB)
1000
/boot
200
/boot/efi
1000
swap
10000
/
Rest of HDD
/home
While the user can only make change on /home partition , the rest partitions are crucial for maintenance and should not be
changed.
2. To change the partition scheme, for Windows/Hyper-V system:
a. Click the cell you want to change.
b. Adjust the Percentage or Size for this partition, input the Partition Label if necessary, then click the Check icon.
An editable row appears at the top of the table.
c. Enter the data in the following columns:
Mount Point
Size
Percentage
File System Type
NOTE: For Windows/Hyper-V , the user can only use NTFS NOTE:
Partition Label
Then, click the Check icon to complete.
d. Repeat steps c and d to create more partitions.
To change the partition scheme for SUSE/Red Hat system:
a. Click the /home, and click the cell you want to edit.
b. Adjust the Percentage or Size for this partition, enter Partition Label if necessary, then click the Save Changes button. .
c. Should see an editable row at the top of the table.
d. Enter the data in the following fields:
Mount Point
Size
File System Type: for SUSE/Red Hat, user can have the following choices:
btrfs
ext2
ext3
ext4
File System Type Partition Label
Xfs
efi
swap
xfs
xfs
NTFS.
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers 19