Configure Controller - HPE ProLiant User Manual

Table of Contents

Advertisement

For other Linux systems, it only provides the following settings:
Operating System
OS Hostname
Password
Confirm Password
NOTE:
NOTE:
The default password for Red Hat Enterprise Linux is not set up.
The default password for SUSE Linux Enterprise Server is password .
The default password for ESXi 7.x and 8.x is _Passw0rd_ .

Configure Controller

Configure Controller
About this task
About this task
In this page, the user can configure and allocate the disk space. On the OS installation summary page, Intelligent Provisioning checks the
RAID and drive status and performs the following:
If there is an existing logical drive on the hardware/software raid, then Intelligent Provisioning just displays the information.
If there is no existing logical drive, then Intelligent Provisioning automatically creates an OS drive and Data drive based on the number
of drives available.
You can modify the following logical drives:
1. Recommended raid configuration that Intelligent Provisioning automatically created.
2. Array / Logical drive user created from the RSS.
You cannot modify any existing array / logical drive on the server.
NOTE: If there is more than one RAID controller installed on the server, Intelligent Provisioning will automatically select the
NOTE:
best RAID controller for configuration.
Procedure
Procedure
1. Click the Pencil icon on the top-right corner of this page.
2. Click Create Array.
3. Check in the Model number and how you want to use it as an Array or Spare.
4. Click Next.
5. Select the Raid Mode, Raid Size (GB), Accelerator, Legacy Boot priority and Strip size (KB) .
6. Click Next to review your settings.
7. You can either click Back and change the setting or click Done to confirm it.
8. Under, Create Logical Drive you can view the drive information.
9. If you want to delete the current allocation, click Clear all array.
Select OS drive and set partition
Select OS drive and set partition
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Synergy gen11Proliant gen10Proliant gen10 plus

Table of Contents