Reinstalling From An Iso Image - HPE ProLiant User Manual

NOTE: NOTE:
Required fields differ if you do not select Automatically optimize your server.
What will this server be used for?
Enable F10 functionality
Provide anonymous usage and error feedback
Enable automatic application of software and firmware updates to this system
6. Click Next.
7. Enter the following information:
Choose Network Interface for Updates and Installs
Use Proxy
DHCP Auto-configuration: Deselect this option to manually enter DHCP settings, including using IPv6 protocol.
8. To save the changes, click Next, iLO network setting is available to change.
9. Click Submit.
Re-enabling Intelligent Provisioning Re-enabling Intelligent Provisioning
Procedure Procedure
1. Reboot the server and, when prompted, press F9 to access the UEFI System Utilities.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Intelligent
Provisioning (F10 Prompt), and then press Enter.
3. Select Enabled.
4. Click Save & Exit, and then reboot the server.
Reinstalling Intelligent Provisioning Reinstalling Intelligent Provisioning
You can reinstall Intelligent Provisioning instead of using the Firmware Update Utility to ensure you have the latest version. There are two
methods for reinstalling Intelligent Provisioning.
Subtopics Subtopics

Reinstalling from an ISO image

Reinstalling from an ISO image
Reinstalling from an RPM package (Linux only) Reinstalling from an RPM package (Linux only)
Reinstalling from an ISO image Reinstalling from an ISO image
About this task About this task
Procedure Procedure
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers 11