HPE ProLiant User Manual page 18

About this task About this task
In this page, the user can choose to perform manual partition, or let the operating system perform the automatic partition during
installation.
For automatic partition: For automatic partition:
1. Leave the Use Recommended Partition check box checked.
2. Open Select one following drive to configure as OS drive drop-down menu, select the hard drive on which you wish you install the OS.
For manual partition: For manual partition:
1. Uncheck Use Recommended Partition check box; then the below section displays the chart for the default partition. The chart varies
based on the Operating system and version.
For Windows/Hyper-V:
Mount Point
Recovery
EFI system partition
Microsoft reserved partition 16
Basic data partition
While users can only make change on the Basic data partition, the rest of the partitions are also crucial for maintenance, and should not
be changed.
For SUSE system:
Mount Point Size (MiB)
2000
Swap
150
/boot/efi
40000
/
Rest of HDD
/home
While the user can only make change on /home partition, the rest of the partitions are crucial for maintenance and should not be
changed.
For Red Hat Enterprise Linux system:
Size (MB) File System Type
500 NTFS
100 FAT32
NTFS
Rest of HDD NTFS
File System Type Partition Label
swap
vfat
btrfs
Xfs
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers
Partition Label
18