Accessing Version Information In Deployment Settings; A Browser Does Not Import A Deployment Profile Correctly - HPE ProLiant User Manual

The iLO is running in FIPS mode.
Action Action
1. Enter the iLO configuration screen and turn off FIPS mode.
2. Boot the server into F10 mode.
3. After making all changes, enable FIPS mode.
Intelligent Provisioning does not reimage AOIP Intelligent Provisioning
Symptom Symptom
Intelligent Provisioning PXE flashing does not reimage Always On Intelligent Provisioning.
NOTE: NOTE:
The user can follow the command lines only for the reference from Grub menu.
Action Action
Update the Kernel command line with the word "Install". For example:
linuxefi /IP3.30/vmlinuz media=net splash quiet
iso1=http://192.168.100.101/iso/IP330.2019_0103.230.iso iso1mnt=/mnt/bootdevice
nicmac=5c:b9:01:c5:43:d0 install
echo 'Loading initial Ramdisk...'
initrdefi /IP3.30/initrd.img
NOTE: NOTE:
Modify the command as per the system requirements.

Accessing version information in deployment settings

Accessing version information in deployment settings
Symptom Symptom
Version information for the Deployment settings utility is blank.
Cause Cause
Version information is no longer located in the Deployment settings utility.
Action Action
Click the System Information icon at the top of the screen for version information.

A browser does not import a deployment profile correctly

A browser does not import a deployment profile correctly
Symptom Symptom
Intelligent Provisioning does not import a deployment profile correctly.
Action Action
Verify that the profile is saved as a
does not reimage AOIP
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers 52