HPE ProLiant User Manual page 29

8. Do one of the following:
Launch Now
Add another job
9. Click Reboot Reboot at the completion of the firmware update process.
Subtopics Subtopics
Determining the installed Intelligent Provisioning version Determining the installed Intelligent Provisioning version
Determining the installed Intelligent Provisioning Determining the installed
To check the Intelligent Provisioning version, click the System Information
Setting Intelligent Provisioning Setting Intelligent Provisioning Preferences
About this task About this task
Use Intelligent Provisioning Preferences to change the basic preferences, including the interface, keyboard languages, network and share
setting, system date and time, and software update settings. In addition, the EULA is accessible from this screen.
Procedure Procedure
1. On the Intelligent Provisioning home screen, click Perform Maintenance.
2. Select Intelligent Provisioning Preferences from the maintenance options.
3. In the Basic Setting tab, select settings for the following options:
Interface Language
Keyboard Language
Boot BIOS Mode - This is always UEFI Optimized .
System Software Update—Select a source for firmware update.
Update from HPE Website
Update from Custom URL
Time Zone
System Date
System Time
Enable Feedback
Accept EULA, or click Read EULA
In the Network Settings tab, enter the following details:
Choose network interface for updates and installs
Use Proxy, and provide proxy details.
DHCP Auto-Configuration, IPv4/IPv6 switch and provide the configuration details.
Intelligent Provisioning version
System Information
Preferences
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers
version
then check the Intelligent Provisioning version.
29