HPE ProLiant User Manual page 3

Introduction
Intelligent Provisioning
F10/Remote console features
Always On Intelligent Provisioning (AoIP)
Intelligent Provisioning operation
Navigating Intelligent Provisioning
Software installed with Intelligent Provisioning
Accessing Intelligent Provisioning
Accessing Intelligent Provisioning from the iLO web interface
Accessing Intelligent Provisioning using an iLO remote console session
F10 mode options
Selecting F10 mode to use
Initial configuration in Intelligent Provisioning
Using the First Time Setup wizard
Entering First Time Wizard settings
Re-enabling Intelligent Provisioning
Reinstalling Intelligent Provisioning
Reinstalling from an ISO image
Reinstalling from an RPM package (Linux only)
Configuring the hardware and installing an operating system
Configuring the hardware and installing an OS with Intelligent Provisioning
Server support and special characters
Source media types and installation methods supported for each OS
Select Install Source
Configure Installation Settings
Configure OS Setting
Configure Controller
Select OS drive and set partition
Configure Firmware Update
Reviewing your settings
Checking installation parameters
About RAID arrays
RAID 0
RAID 1 and RAID 1+0 (RAID 10)
RAID 5
RAID 50
RAID 6
RAID 60
Dedicated spare
Table of contents Table of contents