HPE ProLiant User Manual page 41

receive a notification if you configured SNMP, AlertMail, or Redfish alerts. The IML is erased later during the One button secure erase
process. After the log is erased, the individual component errors will be unavailable.
When the One button secure erase process is complete, a final IML entry is logged. This entry provides summary information and does
not include failure information for specific components.
The overall progress of the operation can be viewed from the Lifecycle Management page, which is accessible from the iLO web
interface. This page is not accessible during an iLO reset. On HPE Synergy servers, the iLO network settings might be reassigned after
the process is complete, and the system might power on.
3. (Optional) Return the system to an operational state .
4. (Optional) View, save, or delete the One-button secure erase report.
Hewlett Packard Enterprise recommends completing this step.
5. (Optional) If a device failed the erase process, or the device does not support a native sanitize method, do one of the following:
Isolate these devices and use other methods to delete the data.
Securely dispose of the devices according to your organization security policies.
Hewlett Packard Enterprise recommends completing this step.
Returning a system to operational state after One-button secure erase Returning a system to operational state after
About this task About this task
After a system is erased with the One-button secure erase process, use the following procedure to return it to an operational state.
Procedure Procedure
1. Configure the iLO network settings.
2. Install Intelligent Provisioning using an Intelligent Provisioning recovery image.
3. Install an operating system.
4. Optional: Install an iLO license.
5. Configure the BIOS settings and the iLO settings that apply to your environment.
6. (Optional) Create a System Recovery Set.
Viewing the One-button secure erase Viewing the One-button secure erase report
Prerequisites Prerequisites
NOTE: The One-button secure erase report can only be accessed from iLO. NOTE:
The One-button secure erase process completed on the server.
After the One-button secure erase process completed, iLO was configured with an IP address.
Procedure Procedure
1. Click Lifecycle Management in the navigation tree, and then click the Decommission tab.
If the One-button secure erase process completed on the server, the View Last Erase Report button is available.
2. Click View Last Erase Report.
The Secure Erase Report is displayed.
3. (Optional) To sort by a table column, click the column heading.
To change the sort order to ascending or descending, click the column heading again or click the arrow icon next to the column heading.
4. (Optional) Save the One-button secure erase report .
One-button secure erase
report
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers 41