Configuring Intelligent Storage; Configuring An Array Or Logical Drive - HPE ProLiant User Manual

1. From the main Intelligent Provisioning page, click Perform Maintenance > iLO Configuration > Management Settings > Reset Options.
2. Reset option performs the following functions:
Reset iLO
Reset to Factory Default Settings
Clear RESTful API State

Configuring Intelligent Storage

Configuring Intelligent Storage
The Intelligent Storage options allow you to:
Create arrays.
Create logical drives.
Change configuration settings
Subtopics Subtopics
Creating a new array or logical drive using advanced mode Creating a new array or logical drive using advanced mode

Configuring an array or logical drive

Configuring an array or logical drive
Creating a new array or logical drive using advanced mode Creating a new array or logical drive using advanced mode
Procedure Procedure
1. Click + Create Array.
2. Check the hard drives in the list, then click Next to go to next page.
3. Enter a Logical Drive Name.
4. Select a RAID Mode.
5. Select a Stripe Size (KB).
6. Select an Accelerator.
7. Select RAID Size (GB).
8. Select a Legacy Boot Priority , then click the Right Arrow
9. In the Summary page, review the array settings.
10. Click Done. The Storage Configuration main page appears, displaying the following message
the next reboot
11. Reboot the machine and let the operation take effect.
Configuring an array or logical drive Configuring an array or logical drive
Procedure Procedure
Right Arrow to go to next page.
.
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers
The operation will execute on
37