Firmware Image Location - HPE Cloudline CL2600 User Manual

1 .2 Firmware Image Location

This page is used to configure firmware image into the BMC.
To open Firmware Image Location, click Maintenance > Firmware Image Location from the menu bar.
sample screen shot of
The various options of Image Transfer Protocol are given
Image Location Type: Type of location to transfer the firmware image into the BMC either Web Upload during
Flash or TFTP Server.
TFTP Server Address: Address of the server where the firmware image is stored.
TFTP Image Name: Full Source path with filename of the firmware image is stored on TFTP Server.
TFTP Retry Count: Number of times to be retried in case a transfer failure occurs. Retry count ranges from 0 to
255.
Save: To save the configured settings.
Procedure
1. Select the Image Location Type (Web Upload during flash/ TFTP Server).
2. If the protocol selected is TFTP, enter the IP address of the server in the TFTP Server Address field.
3. Enter the TFTP Image Name in the given field.
Firmware Image Location page.
96
.