Configuring Advanced Platform Configuration Options; Advanced Options; Rom Selection; Selecting A Rom Image - HPE ProLiant Gen9 User Manual

Configuring advanced platform configuration
options

Advanced Options

•

ROM Selection

•

Video Options

• Embedded Video Connection
• Fan and Thermal Options
• Advanced System ROM Options
ROM Selection
On a server with redundant ROMs, use this option to revert the server to a previous BIOS ROM image.

Selecting a ROM image

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > ROM Selection and press Enter.
2. Select a setting and press Enter.
a. Use Current ROM
b. Switch to Backup ROM—Reverts to the image in use before the last flash event.
3. Press F10.
Video Options
Use this option to configure the video display. By default, the system BIOS disables the embedded video
controller when an optional video controller is installed in the system. You can use this option to leave the
embedded video controller enabled so that the iLO remote video functions properly and also provides dual-
head video support. Early system startup video is always displayed to the embedded video controller.
NOTE:
• The ability to support dual-head video between the embedded and a stand-up device depends on support
from the operating system. For more information, see your operating system documentation.
• When multiple optional video cards are installed, the card that is selected as primary is based on PCI
enumeration, which varies by platform. You might have to remove and reinstall the cards in a different
order to control which card is the primary controller.

Configuring advanced platform configuration options

119