Chapter 6 Mini Dome Camera Installation - HIKVISION DS-2CD883F-E Installation Manual

Installation Manual of Network Camera

Chapter 6 Mini Dome Camera Installation

6.1 Appearance Description
Camera description:
No.
1
2
3
4
5
6
7
When the network is connected, the "S" LED is solid yellow, while the "L" LED
8
Note:
To reset the default parameters to the camera, you need to press and hold the RESET button and
power on the camera. After the power on of the camera, you must still press and hold the Reset
button for about 20 seconds
Camera wiring Diagram:
Figure 6-1
Table 6-1
P: Power LED indicator, It is solid red when power is applied to the unit.
S & L: Network status LED indicator.
Overview
Description
Description
Cover
Lens
Base plate
Set screw hole
Set screw of lens
flashes orange.
RESET: Reset button.
57