Chapter 12 Eptz; Patrol; Auto-Tracking - HIKVISION iDS-2CD70C5G0/H-AP User Manual

EPTZ (Electronic PTZ) is a high-resolution function that digitally zooms and pans into portions of the
image, with no physical camera movement. If you want to use the EPTZ function, make sure your
device supports the Third Stream. Third stream and EPTZ should be both enabled simultaneously.
Note
The function is only supported by certain device models.

12.1 Patrol

Steps
1. Go to Configuration → EPTZ .
2. Check Enable EPTZ.
3. The default Stream Type is Third Stream and cannot be configured.
4. Select Patrol in Application.
5. Click Save.
What to do next
For the detailed information about the patrol settings, see the PTZ operations on live view page.

12.2 Auto-Tracking

Steps
1. Go to Configuration → EPTZ .
2. Check Enable EPTZ.
3. The default Stream Type is Third Stream and cannot be configured.
4. Select Auto-tracking in Application.
5. Click Detection Area to start drawing.
6. Click on the live video to specify the four vertexes of the detection area, and right click to
complete drawing.
7. Set rules.
Detection Target
Human and vehicle are available. If the detection target is not selected, all the detected
targets will be tracked, including the human and vehicle.
Note
Only certain camera models support this function.
Sensitivity
Network Camera User Manual

Chapter 12 EPTZ

79