Technical Specifications - Strong SRT 8222 User Manual

Digital terrestrial hd twin tuner receiver
Table of Contents

Advertisement

9.0 TECHNICAL SPECIFICATIONS

Demodulator:
Demodulator:
Transmission mode:
Video Decoder:
Profile level:
Video resolution:
Decoding:
Aspect ratio:
Audio Decoder:
Audio support:
Sampling rate:
Audio mode:
* Dolby Digital Plus, Dolby Audio and the double-D symbol are registered trademarks of Dolby Laboratories.
Tuner:
Front End:
Input frequency range:
Input signal level:
Antenna power:
Memory and System:
Flash memory:
SDRAM:
Connectors:
RF IN - IEC Female
TO TV
S/PDIF (coaxial output)
HDMI
RJ 45 Ethernet
TV SCART (CVBS, Audio L&R)
USB 2.0 port: 5 V/500 mA (max.) supported
General Data:
Supply voltage:
Power consumption:
Power consumption in standby:
Operating temperature:
Storage temperature:
Operating humidity range:
COFDM; 16 QAM/64 QAM; QPSK; 128/256QAM
2 K - 8 K
HEVC (H265)
AVC/H.264HP@L4.1, MPEG-4 ASP supported
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PAL/NTSC
4:3 Letterbox, 4:3 Pan & Scan, 16:9 Widescreen, Auto
Dolby Digital Plus*/AC3+/PCM
MPEG MusiCam Layer II
32, 44.1, 48 KHz
Stereo, Multi-Audio
DVB-T/T2, UHF & VHF Tuner
174 – 230 MHz (VHF) and 470 - 790 MHz (UHF)
-20 ~ -82 dBm
5 V DC, max. 50 mA, short cut protected
8 MB
Internal(1G bit DDR3)
220 - 240 V AC (SMPS), 50/60 Hz
5 W (typ.), 10 W (max)
<1 W
0 ~ +40° C
-25 ~ +60° C
10 ~ 85%, RH, Non-condensing
21

Advertisement

Table of Contents
loading

Table of Contents