Technical Specifications - Strong SRT 3002 User Manual

Digital hd cable receiver
Table of Contents

Advertisement

Playback of video (or Timeshift)
is causing picture freeze/macro
blocks or similar distortion,
especially on HD content.

9.0 TECHNICAL SPECIFICATIONS

Tuner
Tuner:
Input Impedance:
Minimum Input Level:
Receiving Channel Range:
Modulation:
Symbol rate:
Video Decoder
Video resolution:
Decoding & Video Out:
Aspect ratio:
Audio Decoder
Audio decoder:
Audio support:
*Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories.
Multimedia
Video playback:
Audio playback:
Picture view:
*STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on codec used, data bit rate and resolution (all
MPEG codec formats are supported).
System
Transponder:
Main Processor:
Demodulator:
Memory:
FLASH size:
Connectors
Cable IN - IEC Female
Cable OUT - IEC Male (Loop through)
HDMI
TV SCART
S/PDIF (coaxial)
USB 2.0 port : DC 5 V, 500 mA (max.) supported
Net adapter (12 V/0.5 A)
General Data
Supply voltage:
Power consumption:
20
Read/write speed of your USB device
could be too low.
NXP8250B
75 Ohm
≤ 40 dBuv (64 QAM)
≤ 44 dBuv (256 QAM)
47 MHz ~ 862 MHz
16, 32, 64, 128, 256 QAM
3.6 M ~ 6.952 MS/s
480i, 480p, 576i, 576p, 720p, 1080p
PAL
4:3, 16:9
MPEG-1 LAYER 1&2, Dolby Digital, Dolby Digital Plus
AC3+/PCM/Dolby® Digital Plus*
MPEG encoded (mpg), VOB, TS, M2T, M2TS, MPEG-4 and MOV*
MP3 and OGG*
BMP and JPEG*
DVB-C
Ali M3711B
NXP8250B
DDR2 64 MB
4 MB
100 - 240 V AC (SMPS), 50/60 Hz
4 W (typ.) 6 W (max.)
Make sure to use a USB storage
device with sufficient speed and
space. Pen drives ('USB sticks') may
not support sufficient speed.

Advertisement

Table of Contents
loading

Table of Contents