Table of Contents
Advertisement
English
10.2 Wi-Fi Network
If you have selected Wireless in the IP setting Connection menu, then select the network you want to use. A list
of available wireless network names is shown. If selected and the network needs a Password, then enter it in
the on-screen keyboard.
NOTE:
10.3 Weather
Check the Weather in your area!
Use the COLOUR buttons to setup this simple app.
Select with YELLOW a major City near you from the list, or search with GREEN any major city in the world.
11.0 CONDITIONAL ACCESS
This item allows you to check your Conditional Access Subscription status, download new software via
Internet, or via USB device.
11.1 CA Menu
CA Info
See technical information about the CA System, useful for servicing.
Smart card info
Check the status of your Smart card. If all OK, it will show CA_SMARTCARD_STATE_OK.
Mail List
This submenu allows you to read messages from operator. If an operator wants to send
messages, it will be displayed on the TV screen, showing the icon. Press on the remote
control or open the submenu to read the message. Press RED button to delete all messages
from the list. Press BLUE to delete the selected message. Press BACK button to return to
previous step. Pres EXIT to exit the menu and go back to viewing mode.
NOTE:
11.2 Software Update
Manually upgrading. Selecting this submenu will perform a search on Satellite for a newer version of the firmware
and, if found, select Yes to upgrade or No to skip upgrade. After upgrade is finished, the unit will reboot itself.
NOTE:
11.3 USB Update
Software Update via USB device, follow the instructions on screen, after you have downloaded the software
from the manufacturers or providers website.
NOTE:
12.0 TROUBLESHOOTING
There may be various reasons for faulty operation of the receiver. Please check the receiver according to the
procedures shown below. If the receiver does not work properly after checking it, please contact your local
service line or STRONG dealer. Alternatively, you can send a support e-mail via our website: www.strong.tv.
A pop up message is shown to indicate whether the connection is successful or
not. In the list, a confirmation sign is shown at the connected network.
Not all providers support this function.
A software upgrade via satellite may take some time, even up to an hour, to
complete. The unit will automatically check for, and install newer software if
available, according to the default setting in the Update Setting menu.
Not all providers support this function.
23
Advertisement
Table of Contents
