3-5
Node Controls
Status LEDs
Individual LEDS are located on the back of each serverboard node on the rear of
the chassis.
Power Button and LED
This button will power on the node individually. It is illuminated green when the node
is powered on, it is off when the node is powered off.
UID Button and LED
This button is used to identify the node within the system. It is illuminated blue when
activated, it is off when inactive.
Figure 3-3. Rear Node LED Indicators
3-5
Chapter 3: System Interface
Power Button
and LED
(Green)
UID Button
and LED
(Blue)
Failure LED
(Red)