Connector Definitions - Supermicro SuperStorageSystem 6048R-E1CR45H User Manual

SuperStorageSystem SSG-6048R-E1CR45H/L User's Manual
LED
LED_A1-A3 CPU1 Memory Fail LED for DIMMs A1-A3
LED_B1-B3 CPU1 Memory Fail LED for DIMMs B1-B3
LED_C1-C3 CPU1 Memory Fail LED for DIMMs C1-C3
LED_D1-D3 CPU1 Memory Fail LED for DIMMs D1-D3
LED_E1-E3 CPU2 Memory Fail LED for DIMMs E1-E3
LED_F1-F3 CPU2 Memory Fail LED for DIMMs F1-F3
LED_G1-G3 CPU2 Memory Fail LED for DIMMs G1-G3
LED_H1-H3 CPU2 Memory Fail LED for DIMMs H1-H3
5-7

Connector Definitions

Power Connectors
A 24-pin main power supply connector
(JPW1) and two 8-pin CPU power
connectors (JPW2/JPW3) must be
connected to the power supply to
provide adequate power to the system.
These power connectors meet the SSI
EPS 12V specification. See the table
on the right for pin definitions.
Secondary Power Connector
JPW2 and JPW3 must also be
connected to the power supply. See
the table on the right for pin definitions.
Warning: To provide adequate power supply to the serverboard, be sure to connect
JPW1 and both JPW2 and JPW3 to the power supply. Failure to do so will void the
manufacturer warranty on your power supply and serverboard.
X10DSC+ Quick Reference (cont.)
Description
5-12
State
On Memory Failure
On Memory Failure
On Memory Failure
On Memory Failure
On Memory Failure
On Memory Failure
On Memory Failure
On Memory Failure
ATX Power 24-pin Connector
Pin Definitions
Pin# Definition Pin # Definition
13 +3.3V 1
14 -12V 2
15 COM 3
16 PS_ON 4
17 COM 5
18 COM 6
19 COM 7
20 Res (NC) 8
21 +5V 9
22 +5V 10
23 +5V 11
24 COM 12
+12V 8-pin Power
Pin Definitions
Pins Definition
1 - 4 Ground
5 - 8 +12V
Required Connection
Status
+3.3V
+3.3V
COM
+5V
COM
+5V
COM
PWR_OK
5VSB
+12V
+12V
+3.3V