Table of Contents
Advertisement
7.
Place the main control valve on one tank and the tank adapter on the second tank.
Place the valve or adaptor over the distributor tube through the bottom of the upper
basket. Slide the valve or adaptor down and thread the valve on the tank by turning
it clockwise. Once the valve or adaptor is hand tight, turn it an additional 1/4 turn to
snug it to the tank.
Need help? 1.800.390.5936
17
www.uswatersystems.com
Advertisement
Table of Contents
Need help?
Do you have a question about the Synergy 9000 and is the answer not in the manual?